カテゴリー: Packing

Twine binding device

The motor feeds the twine and assists its supply to the chamber automatically.

Bale shifter

The bale shifter shifts the released bale to the left or right to ensure a clear path for tractor.

Control box

The control box allows you to release bales in the tractor cab.

Mounting method to tractor

Model: RB-511DX 3-point direct linkage

Three type of operational modes are selectable

Depending on the working conditions, you can choose automatic or manual operation of net reel out and roll release for efficiency.

Net binding device

It takes 5 seconds for net binding, and shortens approx. 21% compared to RB-511DX (twine type)

Improved netting device makes it easier to install the net.

Roller type

Rolled bales are formed in a chamber where material is compressed and baled by eight rotating rollers, which reduces the mechanical noise generated when forming bales.

Tool-less shear bolt

Tool-less design enables easy exchange of shear bolts.

Packing pressure adjustment

Baling pressure level can be adjusted to 20 different stages, depending on the material such as grass, rice straw and wheat straw or silage.

Control panel

Simple structure and easy operation

Pick up roll bale

Bale is released forward with opening chamber

Oil supply equipment

Automatic lubrication equipment for tight chains is equipped as standard!

Gauge Wheel

Gauge wheel standard equipment
It enables efficient work when collecting cut straw in dry fields.
The height can be adjusted between 5 levels.

Wide pick

Wide pick-up specification with working width 102cm
Standard equipment of cut straw attachment and it allows smooth collection of cut straw.

Cutting device

Bale forming with high packing pressure allows easy dismantling of bale

Control panel

The driving control lever and work clutch, etc. are set around the driver’s seat for easy operation.

Full automatic mode

Consecutive operations from net/twine binding to chamber opening and closing can be fully automated.

Small turning V-Hitch

The V- hitch 2-piece towing system allows for easy and excellent workability. Wide pickup with 170cm working width for smooth corner work.

High density Bale With Cutting Function (CR series)

The crop can be cut to a theoretical cutting length of 9 cm, and high-density bales can be formed.

Bottom plate down by lever(CR series)

The bottom plate can be lowered by operating a lever for easy removal of clogged grass.

Gauge wheel

The gauge wheel in the pickup follows the unevenness of the ground, stabilizing pickup and preventing soil Contamination.

Full automatic mode

Consecutive operations from net/twine binding to chamber opening and closing can be fully automated.

Small turning V-Hitch

The V- hitch 2-piece towing system allows for easy and excellent workability. Wide pickup with 170cm working width for smooth corner work.The wide, large-diameter tires allow for stable work even when collecting rice straw.

High density Bale With Cutting Function (CR series)

The crop can be cut to a theoretical cutting length of 9 cm, and high-density bales can be formed.

Bottom plate down by lever(CR series)

The bottom plate can be lowered by operating a lever for easy removal of clogged grass.

Gauge wheel

The gauge wheel in the pickup follows the unevenness of the ground, stabilizing pickup and preventing soil Contamination.

Variable diameter roll bale size

It is possible to make roll bales of the best size according to the number of animals and the type of forage, such as hay , grass and straw.

High density Bale With Cutting Function(VC series)

The crop can be cut to a theoretical cutting length of 9 cm, and high density rolls can be formed. The cutting device can be deactivated and the silage can be baled without cutting. The cutting drum is made of abrasion resistant steel, making it more durable than conventional machines.

Net or Twine

Binding material can be either net or twine. Net can be used to improve work speed, and Twin can be used to prioritize cost.

Gauge wheel

The gauge wheel in the pickup follows the unevenness of the ground, stabilizing pickup and preventing soil contamination.

Share bolt of input shaft

The main share bolt is provided on the input shaft to prevent machine breakdown due to overloading. Share bolts are also provided on the chamber and the pick- up.

Variable diameter roll bale size

It is possible to make roll bales of the best size according to the number of animals and the type of forage, such as hay , grass and straw.

High density Bale With Cutting Function(VC series)

The crop can be cut to a theoretical cutting length of 9 cm, and high density rolls can be formed. The cutting device can be deactivated and the silage can be baled without cutting. The cutting drum is made of abrasion resistant steel, making it more durable than conventional machines.

Net or Twine

Binding material can be either net or twine. Net can be used to improve work speed, and Twin can be used to prioritize cost.

Gauge wheel

The gauge wheel in the pickup follows the unevenness of the ground, stabilizing pickup and preventing soil contamination.

Share bolt of input shaft

The main share bolt is provided on the input shaft to prevent machine breakdown due to overloading. Share bolts are also provided on the chamber and the pick- up.

Control Box

The control box provides easy access to settings such as bale diameter, packing density, number of net windings, and automatic net running. Bale release can be switched between automatic and manual, and the count of bale shaping can be displayed.

High-density Bale With Cutting Function

The cutting system employs a down-cutting system with 10 knives. Crops can be cut to a theoretical cutting length of 9 cm, and highdensity bales can be formed.

Bottom Plate Down With a Lever

Grass clogging can be easily removed by lowering the bottom plate.

Wide Two Belt

Two wide endless belts with excellent durability are used for bale forming. Stable work can be performed for bale core making, and spills from gaps can be reduced.

Gull Wing Cover & Bale Drop Kicker

The side covers are gull-wing type, which opens and closes vertically for easy maintenance.

Input Shaft Share Bolt

Shear bolts on the input shaft prevent machine breakdown due to overloading.

Press Roller & Gauge Wheel

Press rollers allow for uniform crop uptake and smooth operation. The gauge wheel follows the unevenness of the ground, stabilizing pickup, and preventing soil contamination.

Flexible Turn V Hitch

The V-hitch 2-piece towing system allows for easy maneuvering and excellent workability. Wide pickup with a working width of 170 cm realizes smooth corner work.

V-Hitch for small turning

With a wide pickup of 180cm working width and V hitch,work can be done smoothly in narrow field and corner work.

Gullwing cover

The cover opens up and down,maintenance is also easy.

High density baling with cutting function

Cutting mechanism ia a down-cut method with 11 knives arranged.Cutting grass with a theoretical cutting length of 9 cm,silage quality is stable with high density baling formihg.

Drop floor system that can easily eliminate grass clogging

It is easy to eliminate grass clogs that are working on the drop floor system by operating the hydraulic lever.